Oscillator
The Oscillator can improve the effectiveness of bit weight transfer and reduce the friction between drilling tool and borehole through the longitudinal vibration produced by the hydraulic action of drilling fluid, especially in the process of directional drilling to improve the bit weight transfer and reduce torsional vibration. It is a downhole tool used to solve downhole depressurization and improve weight on bit transfer. Smooth weight on bit transfer improves the ability to adjust the bit toolface to reach further target zones. It does not require too much work to adjust the tool face during drilling, keeping the tool face stable and increasing ROP. Particularly suited for horizontal, extended-reach Wells, it can be used in conjunction with MWD, screw, and any bit.
Related products
GX-X Type Non-rotating Casing Scraper is one of the indispensable auxiliary tools for well completion, testing and downhole operation. The main purpose of the scraper is to remove cement, sand, residual bullets, scratches, paraffin, burrs and other attachments from the inner wall of the downhole casing, and protect the inner wall of the casing, so as to facilitate the normal operation of all drilling tools. Type B non rotating scraper is not suitable for drilling operation.
CZJQZ-II 360° Rotation Hydraulic Make/Break unit is designed to safely and efficiently make-up/break-out downholetoolsandmotors. It adopts a unique 360° rotational headstock clamp design. This unit is designed for fast, accurate anddependablemake up and break out of threaded connections. The 360° rotational clamp design greatly enhances the speed andaccuracyofmake-up and break-out of tools.
CZPT-II Hydraulic make-up/break-out platform is mainly used with Make/ Break unit assisting in the pre-assembly of drilling tools, whereby special guiding and alignment of tools are required for proper locking and unlocking of threads during assembly. The precision of tool alignment is the key to fast and accurate make-up and break-out of tools either in the workshop or on the rig. CZPT-II is generally designed to support all types of Make-up/Break-out Unit for its pre-assembly tool alignment and thread guiding. CZPT-II ensures high production efficiency during make- up/break-out of tools.
1. The Oscillator can effectively reduce the friction between the BHA and the borehole wall and effectively improve the bit weight transfer in sliding drilling.
2. Reduces downhole torsion, reduces lateral vibration and increases ROP.
3. Directional drilling efficiency can be greatly improved, allowing for smoother boreholes.
4. Oscillators can be used in vertical Wells, motor guided drilling, rotary guided drilling, extended reach Wells, shale gas reservoir drilling.
5. Can solve the problems of support pressure, slip and poor control of the bit on the tool face. Improve directional drilling tool face control, effectively improve the directional ability.
6. The pressure pulse generated by the hydraulic oscillator does not interfere with the MWD signal and will not damage the MWD instrument.
7. The Oscillator has good adaptability to conventional PDC bit and roller cone bit.
